Satkirti Filters


Satkirti Filters has carved a niche in the market for Manufacturing and Supplying Filtration Equipment like Sintered Bronze Products, Compressed Air Filters, Process Filtration System and Pressure Vessels.

Quick Contact

Rudravedh Plaza, Plot No. 11A/4, Shop No. 3, S Block, MIDC Bhosari, Pune 411026. MAHARASHTRA., Pune, Maharashtra - 411023, India

Phone : +91-20-25292886

In Line Filter Housings

We manufacture all types of In Line Filter Housings for efficient filtration of Oil, Water, compressed gas and air at high pressure and temperature. Our In Line Filter Housings efficiently operates at pressure range from 100 kg/cm to 300 kg/cm. With the use of advanced technology, we offer simple, duplex and in-line Housings. Our In Line Filter Housings find wide applications in different industries.

Specifications :

  • Temperature up to 150 deg C
  • Seals : Buna N, Nitrile, Viton
  • Low Initial Pressure Drop
  • Can be designed for high flows up to 30,000 cfm

Applications :

  • Pressure Line Filters
  • Suction Staniners
  • Filler Breathers


Simplex, Duplex And In Line Filter Housings

Satkirti Maufactures all types of simplex, Duplex and in line housings reuired for filtration of oil, water, compressed gases and air with high temperature and pressure.

  • Pressure up to 300 kg / cm2 possibe, Standard housings up to 100 kg/cm2
  • Temperature up to 150 C.
  • Seals - Buna N, Nitrile, Viton
  • Low intial presure Drop
  • Can be designed for high flows up to  10,000  lpm
  • Applications -  pressure  line filters, suction strainers, filter Breathers

This Three stage Filtration system was designed for N.T.P.C (kota) for removal of dust & moisture and odour from air.  Filtration - 10 micron Bronze, 0.01 micron Borosilicate Glass Fibre paper & Activated Carbon for Odour removal.Op. Pressure: 1.6 bar.

This Filter is designed and manufactured for Gas Turbinr Research Establishment (GTRE), Bangalore

  • Air Flow - 2 Kg/ Sec, Op.
  • Pressure - 40 Kg / cm2
  • Op. Temperature: 650 deg C,
  • MOC - S.S. 304 O.D. ; 324 mm,
  • Length of vessel - 1.9m Flange
  • Class - 1500 Forged, Flange
  • O.D. - 675 mm, 125 mm thk
  • This filter was tested at 170 bar pressure for 30 min.
  • Filtration - 10 micron sintered S.S. Non -Woven Wire mesh 316L.